AERIAL WORK PLATFORM - SCISSOR LIFT & BOOM LIFT
SCISSOR LIFT, 26' ELECTRIC
Image for reference only 
Click on above thumbnails for alternate view |
|
Manufacturer: Terex
Model: GS-2632
4 Hour: $196.00
Daily: $221.00
Weekly: $469.00
Monthly: $901.00
Instructions: <Click Here>
Additional Information
- A Tool Shed has 8 conveniently located Equipment Rental locations in Santa Clara, Campbell, Morgan Hill, Santa Cruz, Watsonville, Hollister, Salinas, and Greenfield for all your Equipment Rental needs.
- Trailer & Tie Down Package Available at Special Rate When Rented with This Scissor Lift.
- Genie GS-2632 Scissor Lift
- Its narrow width allows access in hard-to-reach spots. This scissor lift fits through a standard doorway. (with rails folded)
- 90 degree steering provides zero turning radius and excellent maneuverability.
- Single door access 32 in
- Variable speed motor extends battery and motor life by using only the energy needed to do the required work.
- GS-2632 Standard Features
- 500 lb lift capacity
- 39 in roll-out platform extension
- Non-marking tires
- AC wiring to platform
- Maximum platform height 26'
- Height 84 3/4" (75 1/4" rails folded)
- Length 96 1/4"
- Width 32"
- Weight 4,413 lbs
- www.genielift.com
- JLG E2632 Scissor Lift
- Run Longer on a Single Charge: Delivers double the battery life*
- Reduce Operating Costs: Electric drive and integrated components with reduced hydraulic components on the entire machine lower the chances for leaks and service calls to keep you on the job longer
- Increase Your Maneuverability: Narrow width fits through most standard doorways and tight aisles
- *Compared to a competitive model under similar test conditions. Actual results may vary.
- Standard LED Motion/Amber Beacon
- E2632 Standard Features
- Two operating modes, one for indoor use and the other for outdoor applications.
- Reach Specifications
- Working Height (Indoor) 31 ft 6 in.
- Maximum Platform Height (Indoor) 25 ft 6 in.
- Drivable Platform Height (Indoor) 25 ft 5 in.
- Maximum Platform Height (Outdoor) 21 ft
- Platform Capacity - Indoor 507 lbs
- Platform Capacity - Extension 265 lbs
- Platform Capacity - Outdoor 275 lbs
- Turning Radius - Inside 0 in.
- Turning Radius - Outside 7 ft 4 in.
- Machine Weight 4400 lbs
- Dimensional Data
- Ground Clearance 4 in.
- Machine Height 7 ft 4 in.
- Machine Height - Rails Folded 5 ft 10 in.
- Machine Length 7 ft 10 in.
- Machine Width 2 ft 8 in.
- Platform Extension Length 2 ft 10 in.
- Platform Height - Lowered 3 ft 8 in.
- Platform Railing Height 3 ft 8 in.
- Platform Size 25.4 x 84in
- Non-marking Tires
- Wheelbase 6 ft 2 in.
- www.jlg.com
- TOWING REQUIREMENTS
- To safely tow this scissor lift, A Tool Shed requires a 3/4 ton full sized vehicle or larger. You must have a 2" receiver type hitch that is attached to the frame of the vehicle, in good condition, and rated at 10,000 lbs. or more.
- OSHA requires a Safety Harness with Lanyard attached to be worn by anyone in the Platform
- Delivery Fees May Apply. Approved Credit Card Required for Deposit.
Also check the following item(s) related to the above:
- CAR & EQUIPMENT TRAILER 2 AXLE TILT BED
- TIE DOWN PACKAGE 2 BINDERS & 4 CHAINS
- GLASSES, CLEAR SAFETY
- GLASSES, DARK SAFETY
- LEATHER GLOVES
- CLOTH LATEX COATED GLOVES (L)
- EAR PLUGS, PAIR
- HARNESS, F/B W/LANYARD
* Prices are subject to change. Equipment Protection Plan always optional but not included in these prices. Please note that all Monthly Rates are for 28 days with a maximum of 160 hours.
* Please call us with any questions about our scissor lift 26 foot electric rentals in Santa Cruz serving Santa Cruz County & Monterey Bay Area.